Kammprofile_ gasket_spiral_wound_gasket,Teflon

SINSTON ZR-KF710 Kammprofile Gasket, Serrated Gasket, Corruaged Gasket

Description:

Kammprofile Gasket (Serrated Metallic Gasket) consist of a metal core, generally stainless steel with concentric grooves on both sides. A sealing layer is usually applied on either side and depending on the service duty the material for this layer can be expanded graphite, PTFE, Asbestos free gasket sheeting materials or some soft metal. It can be used without sealing layers to provide an excellent sealing but there is a risk of flange surface damage especially at high seating pressure. 　

SINSTON ZR-KF710 Basic Type Kammprofile Gasket

SINSTON ZR-KF710 JR Kammprofile Gasket with integral Outer Ring

SINSTON ZR-KF710 SJ Kammprofile Gasket with Loose Outer Ring

Depending on centering ring with cheaper material (Normal: CS) and thinner thickness (Normal: 1.5mm) for Style ZR-KF710 SJ, maybe it is more economical than ZR-KF710JR.

APPLICATION:

Kammprofile gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint. It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections. Pressure: (6.4~25Mpa)
MATERIAL:
　

Metal material	Din Material No.	Hardness HB	Temp. ℃	Density g/cm3	Thick. mm
CS/Soft Iron	1.1003/1.0038	90~120	-60~500	7.85	2 3 4
SS304, SS304L	1.4301/1.4306	130~180	-250~550	7.9
SS316, SS316L	1.4401/1.4404	130~180	-250~550	7.9

Other special metal is also available on request.
Materials for the faces:
Flexible Graphite, PTFE, Non-asb, etc
Normal with thickness 0.5 mm　

SINSTON ZR-MS720 Corrugated Metal Gasket

Ripple metal gasket the gasket consists of a metal core with concentric grooves on both sides, coated with expanded graphite or PTFE layer.

This gasket has been proven to be bot reliabale and cost-effective for flange and heat exchange application , especially used in low-pressure applications in large diameter flue gas ducts at high temperature, also suitable for uneven or distorted sealing surfaces.It eliminates the problem of difficult handing with large non-metal gaskets used in those applications.

Outstanding mechanical strength and thermal conductivity

Capable of withstanding high temperature

There are almost no limitations regarding size.

Choice of insert metals easier

Trouble-free for handling and installation even for large size.